- Original Audio-Technica ™ AT-VM95SH Cartridge with SHIBATA Elliptical Stylus.
- New, unused from authorised Audio-Technica UK reseller.
- DUAL MOVING MAGNET STEREO CARTRIDGE.
FEATURES:
- Aluminium cantilever
- 3.5mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- 20 to 25,000Hz frequency response
| Model | AT-VM95SH | | Type | VM Stereo Dual Magnet | | Mounting | 1/2” centres | | Frequency Response | 20 - 25,000 Hz | | Channel Separation | 23 dB (1 kHz) | | Output Channel Balance | 1.5 dB (1 kHz) | | Output Voltage | 3.5 mV (@ 1 kHz, 5 cm/sec) | | Vertical Tracking Angle | 23° | | Vertical Tracking Force Range | 1.8 - 2.2g (standard 2.0 g) | | Stylus Shape | Shibata | | Stylus Size | 2.7 x 0.26mil | | Stylus Construction | Nude Square Shank | | Cantilever | Aluminium Pipe | | Coil Impedance | 3.3 kΩ (1 kHz) | | Coil Inductance | 550 mH (1 kHz) | | DC Resistance | 485 Ω | | Static Compliance | 20 x 10 – 6 cm / dyne | | Dynamic Compliance | 10 x 10 – 6 cm / dyne (100 Hz) | | Wire Used for Coil | T.P. Copper | | Recommended Load Impedance | 47,000 Ω | | Recommended Load Capacitance | 100-200 pF | | Cartridge Weight | 6.1g | | Dimensions | 17.2 x 18.9 x 28.3 ( H x W x D mm) | | Replacement Stylus | AT-VMN95SH | | Accessories Included | Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver |
|
| Product Code | VM95SH |
| Condition | New |
| Weight | 0.03kg |
- Original Audio-Technica ™ AT-VM95SH Cartridge with SHIBATA Elliptical Stylus.
- New, unused from authorised Audio-Technica UK reseller.
- DUAL MOVING MAGNET STEREO CARTRIDGE.
FEATURES:
- Aluminium cantilever
- 3.5mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- 20 to 25,000Hz frequency response
| Model | AT-VM95SH | | Type | VM Stereo Dual Magnet | | Mounting | 1/2” centres | | Frequency Response | 20 - 25,000 Hz | | Channel Separation | 23 dB (1 kHz) | | Output Channel Balance | 1.5 dB (1 kHz) | | Output Voltage | 3.5 mV (@ 1 kHz, 5 cm/sec) | | Vertical Tracking Angle | 23° | | Vertical Tracking Force Range | 1.8 - 2.2g (standard 2.0 g) | | Stylus Shape | Shibata | | Stylus Size | 2.7 x 0.26mil | | Stylus Construction | Nude Square Shank | | Cantilever | Aluminium Pipe | | Coil Impedance | 3.3 kΩ (1 kHz) | | Coil Inductance | 550 mH (1 kHz) | | DC Resistance | 485 Ω | | Static Compliance | 20 x 10 – 6 cm / dyne | | Dynamic Compliance | 10 x 10 – 6 cm / dyne (100 Hz) | | Wire Used for Coil | T.P. Copper | | Recommended Load Impedance | 47,000 Ω | | Recommended Load Capacitance | 100-200 pF | | Cartridge Weight | 6.1g | | Dimensions | 17.2 x 18.9 x 28.3 ( H x W x D mm) | | Replacement Stylus | AT-VMN95SH | | Accessories Included | Two 11 mm installation screws;
Two 8 mm installation screws;
Two washers
Non-magnetic screwdriver |
|
| Product Code | VM95SH |
| Condition | New |
| Weight | 0.03kg |
Customer Reviews
Please enter a valid email address.
This field is required.
Deutsch
Dansk
English (US)
Español
Française
עברית (ישראל)
Dutch
Türkçe
